How to Make Unique Valentines Decor with Confetti

Valentine’s Day is just around the corner and it’s time to make some fun Valentines decor.

While browsing the Target Dollar Spot at Target we came across Valentine confetti and tile letters.

We thought that we could take these items and create unique Certainly it is fun to create your own Valentine’s Day decor using Target Dollar Spot finds for only a few dollars!

Not only are these jars of confetti darling, but a little goes a long way too.

In fact, we used such a small amount, we have plenty left over for other crafts or a little sparkle for the Valentine table too!

Play Video

Valentines Decor Supplies

Supplies you’ll need for this project:

This post contains affiliate links for your convenience. As an Affiliate Associate I earn from qualifying purchases never at any additional cost to you. See our disclosure for details.

Prepare Valentines Decor Base

First cut a piece of scrap wood to 11″x11″.

Then paint white paint for the background color.

Enjoying this post?!

Pin it and save it for later. Sharing is caring!

Create Heart Stencil

Next create a heart stencil from scratch paper about 8″ high.

Now position the stencil on the wood with secure with a little painters tape.

Apply Confetti with Mod Podge

Time to break out the confetti!

Use a paint brush to evenly apply a layer of Mod Podge inside the heart stencil.

While the Mod Podge is still wet, lightly scatter each of the different confetti shapes of your choice in the center of the stencil.

After you are satisfied with the amount of confetti, gently press down with your fingers to make sure they stick to the Mod Podge.

Next tap the wood on it’s edge to shake off any loose pieces of confetti.

Then carefully remove the stencil.

After shaking off any loose confetti there may be a few spots to fill in with a bit more confetti.

Apply a little more Mod Podge with a small paint brush and then sprinkle on a little more confetti.

Gently press into place so you know they’re secure.

Finally, allow it to dry completely.

Once the Mod Podge is dry and the confetti is held in place, add another layer of Mod Podge on top of the entire piece of wood to seal the confetti into place.

And then the confetti won’t be going anywhere!