Do you have a wobbly chair or table? Don’t throw it out! Today we are going to show you How to Fix a Wobbly Chair or Table. In fact, this quick and easy furniture repair can be done without any special tools. Not only is this step by step tutorial easy to follow, but when you try it, you will be amazed that it took no time at all.

Sunny Side Design is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. As an Amazon Associate, this blog earns from qualifying purchases with no additional cost to you. Click here to read our  full disclosure policy.

Furniture Repair and new upholstery completed

Alright, you know that Steph and I love thrifting, shopping garage sales and vintage markets. It is one of our favorite past times!

We love finding a discarded piece of furniture, giving it some love and turning it into a treasure. It’s the perfect DIY!

I found a pair of chairs at a yard sale for $5.  The patina on these chairs was absolutely amazing! Keeping the natural wood finish, I just cleaned them up and changed the upholstery on the seats. However, over time some of the joints on one of the chairs became loose. 

As wood ages, it dries out and contracts. Because of this, often joints of old wooden furniture become loose. This is what happened with my chair.  The side stretchers became loose where they join the legs. However, these joints can easily be repaired.

Don’t miss the video tutorial! See the chairs transform from start to finish. 👇

These chairs have been in use in my craft room for awhile, even though one really needed repair. Luckily I didn’t end up flat on the floor! 🤪

As you can see, the joint is loose where the side stretcher fits into the leg. Notice, it had also begun to separate up by the seat.

I knew it was time for a repair. I don’t know why it took me so long to get around to it, because the actual re-gluing only took about 10 minutes.

Repair Wobbly Chair Step 1: Glue

Examine the chair for any other loose joints. You will want to repair them all at the same time.

Pull apart the loose joints of the chair. Apply wood glue into the hole, then push the piece back into the hole.

With a damp cloth wipe off any excess glue.

Note: Don’t let excess glue dry, it is very difficult to remove once dry. Believe me, been there, done that. 😉

adding glue to separated wood joints

There was an area near the seat that was starting to separate. In fact, the joint itself was still tight enough that it would not come fully apart. Nevertheless, I wanted to secure this area while I was repairing the chair. With this in mind, I used a small paint brush, then worked the wood glue into the joint.

adding glue to separated wood joints

Once again, remove any excess glue with a damp cloth.

Are you enjoying this project? Please Pin It, save it for later and share it with a friend.

Sharing is caring!

Repair Wobbly Chair Step 2: Secure Joints

Now secure the joints either with straps, rope or a clamp while the glue dries. The side stretcher joints were easily secured with a strap.

using straps to keep the joints tight while the glue dries

However, it was difficult to get the strap tight enough to pull the joint near the seat together. I tried tapping it with a rubber mallet and I still couldn’t get it tight enough. So, in order to pull that joint together I used a 24″ clamp.

Leave the straps or clamps on the piece until the glue is cured. Let it sit overnight before removing the straps.

This really is a quick fix! It only took about 10 minutes to apply the glue and secure it with the straps.

While I was giving this chair some love, I decided to freshen up the wood finish with some “Old English Scratch Cover.”


If you’re new here, welcome! We’re so glad you’re here.

Let us introduce ourselves, we’re Michelle and Steph, a mom and daughter team who love to DIY and decorate our homes.

Not only are we passionate about making our homes warm, comfortable and unique, but it’s our mission to help you create that same feeling in your own home.

You’ll find ideas for repurposing, creating, decorating and making your home truly yours, while always mindful of a tight budget.

Undoubtedly we love finding ways to make your home look high-end on a small budget.

Plus you’ll also find a recipe or two as we share our family favorites with you.

We’d love it if you’d join our community of doers so you won’t miss any inspiration for your home.

We love new friends.

How to Make the Finish Beautiful Again:

old english to give the wood finish a touch up

Wood finishes can easily dry out with the dry winter air. This hack will restore a wood finish by adding oils back into the wood. Old English scratch cover helps restore damaged wood surfaces. It not only adds moisture to the wood with oil, but it also covers small scratches and imperfections on dark wood furniture. There is also an Old English scratch cover for lighter woods as well.

How to Apply:

Shake well before using. Apply a small amount of Old English Scratch Cover on a soft cloth, then wipe scratches and nicks. Then apply over the entire surface.

applying old english

Let sit for 20-30 minutes to allow it to penetrate into the wood. Wipe dry with a clean cloth. Avoid contact with carpeting, upholstery, curtains and other fabrics. 

If you are curious how it will work on your wood surface, test on an inconspicuous area first.

I have been using Old English Scratch Cover for nearly 40 years. It is a great way to give your wooden finishes some love.

Let’s stay connected! Follow us on social media!

Reupholster a Chair Step 1: Remove Old Fabric

Upholstery supplies needed:

Now the upholstery on these chairs was fine. However, one of the seats was sagging a bit. So in my mind, it was the perfect time to update the fabric, as well as fix the sagging seat.

Begin by removing all of the staples securing the fabric on the chair seat. This little tack remover tool works great for this. A small screw driver may also work.

Reupholster a Chair Step 2: Tighten Webbing

Once all the fabric was removed I could see that the upholstery webbing had stretched over the years.

Once again, using the tack remover tool, I removed the small nails holding the burlap in place, as well as the upholstery webbing on 2 of the sides.

Pulling the upholstery webbing taut, secure it in place with the staple gun. I then folded over the excess length and stapled it down.

original set cushion

Secure the burlap covering over the upholstery webbing. Then replace the padding.

new fabric

Do you love the animal print decor trend right now?  I am wild about it! 😂 There are some amazing animal prints available out there and they feel so luxurious.  I found this amazing Cheetah print and thought it would be fabulous on my chairs.

Reupholster a Chair Step 3: New Fabric

measuring for new fabric

Cut the new fabric about 4″ to 5″ larger than the seat of the chair. This doesn’t need to be exact. We will trim it later.

Begin by wrapping the fabric around the front of the seat and staple in place. Start in the middle and work your way out towards the corners, until about 2″ from the corners.

Turn the chair around and repeat for the back edge of the seat. Again start in the center and pull the fabric taut and staple in place. Work your way out from the center to within 2″ of the corners on each side.

Repeat for each side the same way. The fabric is now secured all the way around except for about 2″ on each side at the corners.

Reupholster a Chair Step 4: The Corners

Notice the corner of my chair has a notch cut out of the wood. This is where it will snugly fit into the frame of my chair. Most chairs will not look like this. This is the first time I have seen the seat frame look this way.

To make a neat corner, pull the corner fabric back at an angle (see photo 2), secure in place with a staple. Trim excess fabric as necessary.

Then fold back one of the sides at the corner (see photo 3), and secure with a staple.

Continue securing that side with staples. Then fold back the fabric on the other side of that corner. Again secure with staples and continue along that side.

Repeat for all 4 corners.

Trim off excess fabric and replace the cushion.

Well, that’s it! Not only did we have a tutorial on How to Repair a Wobbly Chair, but restoring a finish with Old English and a quick little tutorial on re-upholstery.

Make sure to take a look at the video tutorial for more close up shots on How to Repair a Wobbly Chair as well as the re-upholstery.

Furniture Repair and new upholstery completed

What do you think of my chairs? Are you crazy about the animal print? I’m not going to lie, I’m WILD about them. Don’t be surprised if you see more animal print coming soon. 😉

In fact, I decided to use it on an ottoman for my bathroom. 

And for another quick and easy upholstery check out this pair of ottomans.

Furniture Repair and new upholstery completed

Do you have a wobbly chair you are going to fix now?! How about trying a simple re-upholstery on some chairs?

We hope you found some inspiration for your home today.

Please share your tips and ideas with us.

We love hearing from you!

If you’re new here, WELCOME! We love having new readers and friends!

You can learn more about us here.

Let’s stay connected! Join our DIY community of doers and you won’t miss the weekly updates and more inspiration for you always on a budget.

Sharing is caring!

pinterest image how to repair a wobbly chair

Thanks for stopping by Sunny Side Design. Empowering you to create a home you love!

DISCLAIMER


This blog’s content is for entertainment purposes only and is not professional advice. By reading this blog and attempting to recreate a project, you assume all responsibility for any injuries or damages incurred. Read my full disclaimer here.

PHOTO USE AND CONTENT SHARING

All of the photographs you see here are the property of Sunny Side Design unless otherwise credited.

We love for others to share our work, so please feel free to use one photo with a link back to our website.

Pinning and sharing is always encouraged!

Please do not reproduce other Sunny Side Design content without permission.

Retailers We Love

Be sure to follow us on Pinterest for even more home decor and DIY ideas.

To see what we are working on before it’s on our blog, follow us on Instagram.

You will also find our video tutorials on our YouTube channel.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *